Mechanical Endurance/ Lift Cycle Test Bench tests the product for its Mechanical Life without load.

Every manufacturer wants to know how much operations his product can really withstand.

Our “Mechanical Endurance Test Bench” can operate various number of devices simultaneously for the set number of operations. E.g. 10,000, 20,000, 1,00,000 and so on. and for each operation, It tests whether the device under test is functioning correctly or not.

ACB Mechanical Endurance

VCB Mechanical Endurance

Contactor Mechanical Endurance

MCB Mechanical Endurance

MCCB Mechanical Endurance

“Mechanical Endurance Test Bench” can test various ACBs, VCBs, Contactors, MCBs, MCCBs simultaneously independent to their closing and opening times, pausing and retrying etc. You can also start testing a new breaker while previous is running with its set conditions. This gives ease to user as endurance tests go for months.

24×7 operation: “Mechanical Endurance Test Bench” has UPS backup for the control element, and it keeps on monitoring the Mains supply. If it finds that Mains supply has failed, automatically testing is paused. And as soon as Mains appears, Test is resumed the same point. Hence, you don’t need to worry about power failures etc during the test.

Breaker Condition Monitoring: “Mechanical Endurance Test Bench” can be configured about the Main and auxiliary contact continuities along with their temperature conditions. For every close and trip operation, System checks whether breaker is functioning properly. You can also configure it to confirm the failure by retrying automatically.

Multiple voltage range/ Configuration testing: “Mechanical Endurance Test Bench” has option of providing different voltages for its operation for different breakers. I.e. You can test one breaker of 120V, second of 240V and third of 415V simultaneously. Every breaker test can be configured separately e.g. Close pulse time, sleep time after closing, Opening pulse time, Sleep time after opening, motor charging time and so many other.

Data Logging: “Mechanical Endurance Test Bench” is a PC based setup and uses SQL database for data logging. It logs all the events occurred during the test.
e.g. when the test was started, when particular breaker got failed, when it was again resumed, when power had failed, when test resumed automatically, when temperature was risen, how much time did it take to cool down and lots of other.

Remote monitoring: “Mechanical Endurance Test Bench” can also be accessed from any web browser in LAN. There you can monitor the status of all the breaker tests from anywhere in your company and have an eye that tests are being performed well and no human intervention is required.

Email Notification: “Mechanical Endurance Test Bench” can automatically send you email about the status of any event. e.g. power fail, UPS power low, Breaker test fail, Test complete and so on.

In short, Our “Mechanical Endurance Test Bench” is a one stop solution to all your worries for Endurance test of your product. Just turn it On and forget it. It will automatically run 24×7 for several months to complete your test.